background image

68

06/2011 Rev. 7.4        

M o d e l   2 0 0 9

06/2011 Rev. 7.4

69

M o d e l   2 0 0 9

4. SOFTWARE

4.1 Memory card

Type: SD
Capacity: 16Mb  or bigger
Format:  FAT (no FAT32 or NTFS)

4.2 Installing software

The device can easily be installed with new software, which is made available as follows:

  www.Animo.eu / dealer log in: Extranet *

 

By 

Email 

        

4.3 Installing a language

The device has four standard languages (NL/GB/D/F).
The device can easily be installed with another language set (if available).
A new language file can be made available as follows:

  www.Animo.eu / dealer log in: Extranet *

 

By 

Email 

      

* User manuals, service manuals and software updates can be found on the Extranet section of www.
animo.eu. If you do not have access, please request your personal login code on our website.

5.0 SERVICE

 

WARNING

•  In order to descale the water reservoir, the device must be opened. This will expose live parts of    
 

the machine, which can be touched easily. This may lead to highly dangerous situations!

 

WARNING

•  The device must not be submerged or hosed down.

•  Always stay with the device during maintenance work.

5.1 Setting a service parameter

During installation, set a parameter for the device to be 
serviced. See Service Menu item 2.8 Descale /  lter. Use the 
table below to set the correct service parameter.

Service parameter reached?

The dispensed drinks are counted during use. If the service 
parameter is reached the display shows the following message: 

Descale / fi lter

 ( g. 6).

The message indicates that the device must be descaled. If a 
water  lter is  tted (recommended), this is also an indication 
that the  lter must be replaced.

Water hardness table

Water
Quality

Hardness

Limescale

Indicator ...cups

°D

°F

°C

mmol/l

mgCaCo3/l

Very hard

18-30

32-55

11-18

3,2-5,3

321- 536

5000

Hard

12-18

22-32

7-18

2,2-3,2

214-321

8500

Average

8-12

15-22

5-7

1,4-2,2

268-214

12.500*

Soft

4-8

7-15

2-5

0,7-1,4

72-268

20.500

Very soft

0-4

0-7

0-2

0- 0,7

0-72

0 = off

5.2 Preventative maintenance

5.2.1 Service contracts

PREFACE

Preventative maintenance will lengthen the life cycle of the device and reduce the chance of 
malfunction. Before carrying out maintenance, read the safety instructions in the user manual, service 
manual, and recommended cleaning agents.

User manuals, service manuals and software updates can be found on the Extranet section of www.
animo.eu. If you do not have access, please request your personal login code on our website.

Fig. 6

Table 7

/01  

 23 1431

Memory Card

Memory C

ard

Summary of Contents for OPTIVEND 2009
























Reviews: