84
08/2011 Rev. 7.4
M o d e l 2 0 0 9
08/2011 Rev. 7.4
85
M o d e l 2 0 0 9
WARNING
In order to descale the water reservoir, the device
must be opened. This will expose live parts of the
machine, which can be touched easily. This can lead
to highly dangerous situations!
WARNING
The device must not be submerged or hosed down.
Always stay with the device during maintenance
work.
9. SETTING THE SERVICE MOMENT
During the installation of the device, your service engi-
neer set a time for the device to be serviced.
The dispensed drinks are counted during use.
If the set time for service is reached, the display
shows the following message: Descale / lter
( g. 46).
When this message appears, you can continue to use
the device as usual.
The message indicates that the device must be
descaled. If a water lter was tted (advised), this is
also an indication that the lter must be replaced.
For safety reasons, users are not advised to descale
the machine and/or replace the lter. We advise you
to have an authorised service engineer descale and
maintain the device.
Water hardness table
Water
Quality
Hardness
Limescale
Indicator ...cups
°D
°F
°C
mmol/l
mgCaCo3/l
Very hard
18-30
32-55
11-18
3,2-5,3
321- 536
5000
Hard
12-18
22-32
7-18
2,2-3,2
214-321
8500
Average
8-12
15-22
5-7
1,4-2,2
268-214
12.500*
Soft
4-8
7-15
2-5
0,7-1,4
72-268
20.500
Very soft
0-4
0-7
0-2
0- 0,7
0-72
0 = off
10. DRY BOIL PROTECTION
The device has a dry boil protection that is accessible
from the outside. It is located at the back of the device
( g. 47). The dry boil protection turns off the heating
element if the temperature is too high. This is usually
caused by not descaling the device in time. If the
appliance is no longer heating the water, please do the
following:
1. Allow the device to cool down.
2. Remove the black protective knob ( g. 47-2).
3. Now press the visible button ( g. 47-1) and push
the protective knob back into place.
If the safety device turned off the machine and the
message [
Descale / fi lter
] is visible when restarting the
machine, then have the machine descaled. See chapter
9. Time for service.
11. TRANSPORT / STORAGE
Please do the following before transporting or putting
the device in storage.
1. Carry out the brewer and mixer unit cleaning pro
gramme.
2. Clean the ingredient canister(s), mixer system,
leaking tray and casing as described in chapter
8. Maintenance.
3. Switch off the device and remove the plug from the
wall socket ( g. 48-1).
4. Close the water supply tap and disconnect the
water connection tube ( g. 48-2).
5. Drain the water reservoir (max. 5,5liter) by using
the draining tube ( g. 49-3).
6. Put the parts mentioned in point 5 back in their
place.
7. The device is now ready for transport.
8. Before reinstalling the device, please ensure chapter
3. Installation is followed.
iBEOXDB e @ADPBF
fX>B c?KF Om?AOB
Fig. 46
Fig. 49
Fig. 47
1
2
Volt
~
3
Attention:
HOT !
1
2
Fig. 48
Table 10