2015/04 Rev. 1.0
COMBI-LINE
16
GB
safety instructions and danger warnings
This appliance meets the mandatory safety regulations. Inexpert use can result in personal injury and material
damage. The following warnings and safety instructions must be observed before using the coffee maker.
Instructions for use
Read these instructions for use carefully, before using this appliance. This will protect your safety and prevent
damage being caused to the appliance. Perform the various actions in the order given. Always keep this manual
close by the appliance.
Installation
•
Place the appliance at buffet height and on a firm, level base, in such a way that it can be connected
to the power supply (only CNe).
•
Position the appliance in such a way that no damage can be caused if it leaks.
•
Connect the appliance to an earthed wall socket (only CNe).
•
When installing the appliance, always observe the local rules and use approved materials and parts.
•
The Installation chapter must again be followed when repositioning the appliance.
use
•
Inspect the appliance before using it and check it for damage.
•
Never submerge or spray the appliance (only CNe).
•
During use some parts will become very hot.
•
Do not position the container on open fire, or hot plate.
•
First disconnect the electric cable before transporting the container (only CNe).
Maintenance and troubleshooting
•
Do not leave the appliance unattended when maintenance is being performed.
•
Have all repairs carried out by a qualified technician.
•
The plug must be taken out of the socket if the appliance has to be opened for cleaning or repairs (only CNe).
The manufacturer cannot be held liable for losses caused as a result of failure to observe these safety
instructions.
appliances and the environment
The packing material
Your new coffee maker has been carefully packaged to protect it against damage.
The packing is not harmful to the environment and consists of the following materials:
• Corrugated cardboard.
• Filler elements made of polyurethane foam <PUR> covered with a polythene film (>PE-HD<).
The waste processing plant in your municipality will be pleased to inform you where you can dispose
of the materials.
discarding the appliance
No appliance lasts forever. When the time comes to discard your appliance it will usually be possible to return it
to your dealer. If this is not the case, ask your municipal council about the alternatives for recycling the materials.
All plastic parts have been given standard codes. The parts of the appliance such as the printed circuit board and
accompanying parts form electrical and electronic waste. The metal body is made of stainless steel and can be
completely dismantled.
