37
2017/05 Rev. 0.0
EN
ComBi-Line
10. MAINTENANCE
WARNING
• Do not leave the device during maintenance work.
• When descaling, always follow the instructions for the descaler that you use.
• It is advisable to wear safety goggles and protective gloves while descaling.
• After descaling, allow the device to run a minimum of three times.
• Wash your hands thoroughly after descaling.
• The device must not be submerged or hosed down.
Animo supplies descaler in the following quantities:
• Descaler 48 x 50 g sachets (Art. No. 49007)
• Descaler 1 kg can
(Art. No. 00009)
Required time, products and tools:
• Time for the brew system: Approximately 30 minutes.
• Time for the hot water system: Approximately
45 minutes
• Descaler funnel (Art. No. 99740)
• 2 sachets of Animo descaler for each system.
• 2 measuring cups of approximately 2 litres each.
Preparation
• Carefully read the caution notice and the directions for use on the sachet of Animo descaler.
• Dissolve 2 sachets of 50-gram Animo descaler into 2 litres of warm water (max. 60 °C).
Stir the solution thoroughly so that the powder is completely dissolved.
• Remove the basket filter and place a plastic container under the outlet of the swivel arm to collect
the descaler.
• Follow the instructions shown on the display and confirm each action by selecting OK.
Cancelling the program?
If you start the descaling program in the
Service menu,
the program can be cancelled at any time.
If you start the descaling program in the
Operator menu,
the program can be cancelled at any time
until the solution is poured in. Once the solution has been poured in, the program must always be
completed. In case of an emergency stop, the STOP button can be used. The program will then
pause, but not be cancelled.
