Animas IR 1200, User Manual

Page: 37 / 100

Page 37
7
Note: If your screen display has timed out (gone to sleep) before you
have selected Save/Review while editing, a Warning screen will remind
you the basal edit has not been saved. See Chapter 14, Safety System
and Alarms.
11. Review is highlighted. Press OK/Enter to review your entries for
accuracy. Your basal segment settings are shown (5 on first screen, 5
on second screen and 2 on last screen). If you have more than 5
segments programmed, scroll to Next to see second and third screens
as desired.
12. Scroll to Options when finished reviewing and press OK/Enter. The
Basal Options screen is displayed.
a. If you’ve edited and saved/reviewed the active program, it is
resumed automatically. You can also select Go and the Wake up
screen is displayed, which shows the current rate of delivery for the
program that is active.
b. If you’ve edited an inactive program and wish to activate it, select
Go from the Basal Options screen. When you select Go, the Wake-
up screen is displayed, which shows the current rate of delivery for
the program rate that is active.
Adding/Changing Segments in an Existing Basal Program
1. From Basal Menu, select desired program.
2. Edit is highlighted. Press OK/Enter.
3. Scroll up to highlight the field you wish to change or to next available
blank line to add a segment. Press OK/Enter to activate Edit mode.
(The cursor will flash to indicate Edit mode.)
4. Use Up/Down buttons to set Start times and U/hr amounts.
5. Check that the AM/PM settings are correct.
If you program a segment to start at the same time as an existing segment, the previously
entered segment is deleted.
If you program a segment to start at a time that precedes an existing segment, your pump
will automatically move the new segment to the correct place in the basal program screen.
You must then scroll to the newly placed segment, highlight the corresponding U/hr field and
enter or change amount, if desired.
6. When finished, scroll to Save/Review and press OK/Enter. If you have edited the active
program, it is now resumed automatically. The Basal Options screen is displayed.
a. Select Review from the Basal Options screen to review your entries for accuracy. Your
basal segment settings are shown (5 on first screen, 5 on second screen and 2 on last
screen). If you have more than 5 segments programmed, scroll to Next to see second and
third screens as desired.