- 4 -
C13143
170.
fm
IT
GB
DE
FR
ES
English
Although the appliance is complete with all safety
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
A)Automatic resetting Thermostat
; cuts off the
electricity supply in case of overheating.Once the
cause has been eliminated and temperature is
reduced, operation is restored automatically.
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data.
B)Burn hazard:
watch out for hot surfaces.
C)General hazard:
when washing the appliance
do not point pressurised water jets at internal
parts.
D)General hazard:
read the manual carefully be-
fore carrying out any procedure.
E)General hazard:
all relevant regulations must
be complied with. "Install in compliance with the rele-
vant regulations and use in well ventilated premises
only".
F) General hazard:
all relevant regulations must be
complied with. "No liability is accepted in case of fai-
lure to comply with the installation and commissio-
ning instructions".
G)CE marking:
indicates that the appliance is com-
pliant with the relevant norms.
H)WEEE symbol:
indicates that the appliance is su-
bject to specific waste disposal regulations.
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
The appliance can be equipped with the following
accessories on request.
A)
Containers.
B)
Bridging bars for containers.
OPTIONAL ACCESSORIES
A
B
C
E
D
F
G
IDM-39603616100.tif
H
BGN 1/1 BGN 2/3 BGN 1/2 BGN 1/3
BGN 1/6
TRA 11
TRA 12
TRA 16
A
B
IDM-39603606500.tif
A
C13143170.fm Page 4 Tuesday, April 8, 2008 2:42 PM
