Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item,
DO NOT return the unit to place of purchase
. Please visit our web site
www.angelodecor.com
for
assistance and warranty information.
AD97728
Mighty Huron Falls Fountain
Carefully unpack and arrange all
parts.
Locate the light connector; this should
remain outside the fountain
.
IMPORTANT:
to prevent water loss,
create a drip-loop with the light cables
by dipping them into the reservoir
before they exit out the back of the
fountain.
Connect the cable from the
connector to the transformer.
Locate the tubing from inside the
fountain and attach it to the pump.
Water flow can be adjusted using
the flow control on the front of the
pump.
D
R
IP
-LOO
P
Align the cords and install
the pump access door as
shown.
Place the pump inside the fountain.
