These next steps may require two people as the top of the fountain needs to be held or rested on
the fountain.
Now that you have installed the light into the top bowl of the fountain, carefully rest it on the base of the
fountain so that you can make your final connections.
Connect the cord from the light of the
upper bowl to the remaining outlet.
Carefully stow any excess cord so that it
will not interfere with setting the top in
place.
Connect the tubing from the top to the
pump as shown above.
Place the cord pipe cover over the cord
pipe as shown above.
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend keeping bowl 3/4 full of water to avoid pump burnout.
Product must be properly stored for winter.
Page 2 of 2
The final assembly should
look like this
These next steps may require two people as the top of the fountain needs to be held or rested on
the fountain.
Now that you have installed the light into the top bowl of the fountain, carefully rest it on the base of the
fountain so that you can make your final connections.
Connect the cord from the light of the
upper bowl to the remaining outlet.
Carefully stow any excess cord so that it
will not interfere with setting the top in
place.
Connect the tubing from the top to the
pump as shown above.
Carefully set the top in place, being sure not to kink the
tubing or pinch any of the cables.
Attach the cord from the lights to the transformer.
Place the cord pipe cover over the cord
pipe as shown above.
