6
Commercial and Industrial Premises
This smoke alarm is not intended for any
non-residential, commercial or industrial
application, nor for any other purpose
than described above
Mobile Homes and Caravans
This smoke alarm is suitable for
use in mobile homes and caravans
In caravans:
1 The preferred position for fitting
the smoke alarm is horizontally on
the ceiling in the living area Avoid
proximity to the kitchen
2 An additional smoke alarm may be
fitted in one or more bedrooms
3 DO NOT locate in kitchen or bathroom
area Cooking fumes and high humidity
can trigger nuisance alarms
4 DO NOT locate smoke alarms close to
exhaust fans or air conditioning units,
which could draw smoke away from
the alarm
In mobile homes:
1 If only one smoke alarm is to be fitted,
it should be located horizontally on the
ceiling, either in the living room or the
hall, but not in the proximity of either
kitchen or bathroom
2 Additional alarms can be fitted in
bedrooms
3 DO NOT locate alarm close to exhaust
fans or air conditioning
INSTALLATION
4 Separate the alarm from the mounting
plate This may require you to turn the
alarm clockwise while holding the base
plate
WARNING: do not screw the base plate
of the alarm to it’s mounting surface
with the alarm fitted to it Dust from the
fitting process could contaminate this
very sensitive device
5 Locate the base plate in your chosen
position and mark the position of the
mounting holes Drill the holes using
a 4 75 mm drill Insert the anchor plugs
and screw the base plate to the chosen
position DO NOT OVER-TIGHTEN THE
SCREWS this will distort the base
plate
Test button
Sounder
Alarm base
mounting hole
Operating light
Alarm base
mounting hole
6
Fitting / Replacing the batteries:
a Undo the screw and remove the
battery access door from the back of
the alarm
When alarm is located on base unit,
twist in this direction to lock
Line up arrows
and insert
alarms into
base
Battery
cover
Fit two new AAA (LR03) batteries
(supplied with a new alarm) in the
battery bay making sure they are
fitted the correct way round by
referring to the diagram on the back
of the alarm Allow ten seconds
before testing the alarm
WARNING: USE ONLY DURACELL
MN2400 OR GP 24AU BATTERIES
OR ENERGIZER LROJ, OTHER
BATTERIES MAY BE INADEQUATE
b Refit the battery access door
7
Line up the arrow on the back of the
alarm with the arrow inside the base
plate and inset the alarm Once the
Summary of Contents for SA700-AE-UK
Page 12: ......
