E
N
11
ALERTS ICONS
1
2
3
5
6
7
4
1
1
1
1
1
1
1
Sensor Pad alert:
If after 20 seconds
there is NO movement detected both the
Parent Unit and Nursery Unit speakers will
emit loud consecutive beeps - this is the
movement alarm.
2
Sensor Pad is paused
3
Sensor Pad lost link:
Parent Unit and
Nursery Unit speakers will emit loud
consecutive beeps.
4
Sensor Pad battery is low:
Parent
Unit will emit 3 consecutive beeps, every
5 seconds.
5
Parent Unit is out-of-range:
Parent Unit will
emit 2 consecutive beeps, every 10 seconds.
6
Temperature is too cold:
Parent Unit will
emit 3 consecutive beeps, every 5 seconds.
7
Temperature is too hot:
Parent Unit will
emit 3 consecutive beeps, every 5 seconds.
Note:
Press any key
to stop alarm
and make the alert icon disappear.
In the case of a
Sensor Pad alarm
, the monitor will Pause the Sensor Pad. In Pause mode, the
movement detection feature is disabled. To reactivate the Sensor Pad, simply un-pause the
Sensor Pad into the first menu.
6- ADDING ACCESSORIES
Your Angelcare monitor allows you to add an additional Nursery Unit and Sensor Pad. Please contact
your local distributor to see what is available in your country.
IMPORTANT:
• When using two Nursery Units you will only be able to hear audio from one Nursery Unit at a
time (Nursery Unit sound transmitted is highlighted in the info bar). In split screen, the sound
transmitted from the Nursery Unit will be indicated on the screen by a speaker icon shown to
the right of the CAM icons.
• When using two Sensor Pads with one Monitor, it is recommended that each Sensor Pad is
located in separate rooms.
7- TROUBLESHOOTING
TAKING CARE OF YOUR RECHARGEABLE BATTERY
• Ensure that you fully charge your battery for 8 hours before its first use.
• To maintain maximum battery life, it is recommended that you fully discharge your battery periodically. If your
Parent Unit is not in use, please turn it
OFF
.
