Blending
01. Please tighten the egg beater parts onto the main body(Pic5)
02. Insert the plug to the power socket.
03. Put the egg beater into the middle of preparing food.
04. Press the power switch ,the blender will continue working. For achieve a good effect ,please
move the stirring rob up and down during processing .When you need to turn off the machine, just
move the finger away the power switch ,the motor will stop revolving immediately. (Use slowly
speed switch )(Pic6)
05. Each working time should be less than 3minutes.
06. Move the finger away from the power switch when finish processing
07. Cut off the power
Chopping
01. Put the chopper cup onto the flat place , cut the food into small pieces and add into the chopper
cup (remove the bones ,muscle and fat meat before processing)(Pic7)
Noted : Do not adding the food more than MAX level to avoiding affect the processing effect ,and
protect the machine working lifetime.
02. Put the chopper cup cover onto the chopper cup and make it tighten .
03. Please tighten the chopper cup cover to the main body.(Pic8)
04. Press the power switch ,the machine will continue working .(use quickly speed first and later
use slowly speed )
05. Each working time should be less than 30 seconds
Noted : because rated power of the motor is high ,please grip the handle during processing .
06. Move the finger away from the power switch when finish processing
07. Cut off the power
08. After the blades stop revolving , Please take down the main body first and then take down the
chopper head .
09. Take out the blades from the processing food carefully to avoid bodily injury .(Pic9)
10. Take out the finished food from the chopper cup
Noted : Do not operate the chopper with an empty cup.
7.Cleaning and Maintenance
Main body and Stirring rod
01. Cleaning the main body and stirring rob completely after using the machine every time.
02. Loosen main body and stirring rod and separate of them
03. Wipe the main body with
sponge
or wet cloth .Don’t use any powder cleaning agent for
cleaning to avoid damage main body .(Do not immerse the main body into water or any other
liquid )(Pic10)
04. The bottom of stirring rod can be immerse to the warm water and add cleaning agent and
clean it by hands (the blades is SHARP ,be careful !)(Pic11)
