Chopper and Accessories
01.To avoid the sticking foods become dry and with bad smells ,please clean the chopper
cup ,choper cup cover and blades immediately after finish processing .
02.Seperate the chopper cup cover with the cup ,and take out of blades with care ;
03.Cleaning the chopper cup and blades with cleaning agent, then rinse it with cleaning water and
make it dried .(To avoiding bodily injury ,please don’t keep the blades inside the cleaning water
during cleaning the machine)(Pic12)
04. Wipe the chopper head with foam or wet cloth to remove the food stick on it .
(do not put the chopper head immerse into water of any liquid )(Pic13)
Egg beater Accessories
01. Separate the egg beater head with the egg beater
02. Wipe the egg beater head with sponge or wet cloth (Do not immerse egg beater head into the
water or any other liquid )(Pic14)
03. Use warm water with cleaning agent for clean egg beater ,or put it into the cleaning machine
for clean.(Pic15)
Noted : all the accessories should be stored in dry place and keep away from sun. Please make
sure all the accessories are cleaned and dry before storage.
9. FAQ& Trouble shooting sheet
Problem
Possible causes
The motor working as normal, but the blades do not work
Check the main body if tighten with
the parts
Check the blades if stuck by any foods
Solutions
Tighten the main body with parts
Separate the blades with the blades cover , put them into the warm water for immersing 30
minutes and then tighten this two parts and connect the power supply, turn on the power switch
and let it revolving 20-30 seconds in the water.
The motor shut down during processing
The motor use for a long time or the motor broken
