TO THE PURCHASER, OWNER AND STORE MANAGER
Please review these warnings prior to posting them in a prominent location for reference.
ii
150-000004 Rev A (2/19)
TO THE PURCHASER
Post in a prominent location the
instructions to be followed in the event
that an operator smells gas. Obtain this
information from your local gas supplier.
FOR YOUR PROTECTION
DO NOT store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
Do not spray aerosols in the vicinity of
this appliance when it is in operation.
WARNING
Improper installation, adjustment,
operation, alteration, service or
maintenance can cause property
damage, injury or death. Read the
installation, operating and maintenance
instructions thoroughly before
installing, operation, servicing this
appliance.
WARNING
Installation, maintenance and repairs
should be performed by an Anets
Authorized Service and Parts (ASAP)
company technician or other qualified
personnel. Installation, maintenance or
repairs by an unauthorized and
unqualified personnel will void the
warranty.
WARNING
Installation and all connections must
be made according to local codes in
force. In the absence of local codes in
North America, the installation must
conform with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54 or the
Natural Gas and Propane Installation
Code CSA B149.1 as applicable. In
Australia, the appliance must be
installed in compliance with AS/NZS
5601.
WARNING
During the warranty period if a customer
elects to use a non-original part or
modifies an original part purchased from
Anets and/or its Authorized Service and
Parts (ASAP) companies, this warranty
will be void. In addition, Anets and its
affiliates will not be liable for any claims,
damages or expenses incurred by the
customer which arises directly or
indirectly, in whole or in part, due to the
installation of any modified part and/or
received from an unauthorized service
center.
WARNING
This appliance, when installed, must be
electrically grounded in accordance with
local codes, or in the absence of local
codes, with the National Electrical Code,
ANSI/NFPA 70, or the Canadian
Electrical Code, CSA C22.2, as
applicable and the hose must comply
with AS/NZS 1869 and be class B or D.
WARNING
Adequate means must be provided to
LIMIT the movement or this appliance
without depending on the gas or
electrical cord connection. Single
appliances equipped with legs must be
stabilized by installing anchor straps.
All appliances equipped with casters
must be stabilized by installing
restraining chains.
WARNING
An appliance equipped with casters and
a flexible gas line must be connected to
the gas supply with a quick disconnect
device. In North America, this quick
disconnect must comply with ANSI
Z24.41. In Australia, the quick
disconnect must comply with AS 4627.
