－
1
－
Spray Gun
Important
Be sure to observe warnings and cautions in this instruction manual.
If not, it can cause paint ejection and serious bodily injury by drawing organic solvent.
Be sure to observe following
marked items which are especially important.
Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or loss of life.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or property
damage.
Important
Indicates notes which we ask you to observe. The safety precautions in this instruction manual are the minimum
necessary conditions. Follow national and local regulations regarding fire prevention, electricity and safety as well as
your own company regulations.
■
Main specifications
Model
Type of
feed
Nozzle
orifice
φ
mm (in)
Air cap
Assy
Recommended condition
Air & fluid
connection
Mass
g (lbs)
※
1 Atomizing
air pressure
MPa (bar /PSI)
Fluid output
ml/min
Air
consumption
l/min (cfm)
Pattern width
mm(in)
W-71
-0
Pressure
0.8 (0.031)
0
0.34
( 3.5 / 50 )
200
240 (8.5)
190 (7.5)
G1/4 (Air)
G1/4 (Fluid)
475
(1.05)
-02
1.0 (0.039)
02
300
230 (8.2)
265 (10.4)
W-71 -1S
Suction
1.0 (0.039)
1
0.29
( 3.0 / 43 )
95
75 (2.7)
100 (3.9)
-2S
1.3 (0.051)
2
135
85 (3.0)
135 (5.3)
-3S
1.5 (0.059)
3
180
165 (5.8)
170 (6.7)
-4S
1.8 (0.071)
4
195
230 (8.2)
200 (7.9)
-21S
1.3 (0.051)
21
140
195 (6.9)
155 (6.1)
-31S
1.5 (0.059)
31
170
230 (8.2)
170 (6.7)
W-71 -1G
Gravity
1.0 (0.039)
1
110
75 (2.7)
120 (4.7)
-2G
1.3 (0.051)
2
155
85 (3.0)
155 (6.1)
-3G
1.5 (0.059)
3
210
165 (5.8)
185 (7.3)
-4G
1.8 (0.071)
4
220
230 (8.2)
230 (9.1)
-21G
1.3 (0.051)
21
160
195 (6.9)
165 (6.5)
-31G
1.5 (0.059)
31
190
230 (8.2)
185 (7.3)
※
1. Atomizing air pressure means air pressure at gun inlet when trigger is pulled and air flows
．
This Anest-iwata spray gun kit complies to ATEX
regulations 94/9/EC,
Protection level
：
Ⅱ
2 G X
，
Suitable for use in
Zones 1 and 2.
X marking
：
Any static electricity discharge from the spray gun
is to be diverted to the grounded the conductive
air hose as stipulated
.
W-71
■
Important specifications
Max. Pressure
０．６８
ＭＰａ
/
６．８
b a r /
９８
ＰＳＩ
Noise level
７４．８
ｄ
Ｂ
（Ａ）
Spray condition
Recommended
Measuring point 1m backwards from gun,
１．６
m height
Max. Temperature
Atmosphere
５℃～４０℃
Air
・
Fluid
５℃～４３℃
This manual contains IMPORTANT WARNINGS
and
INSTRUCTIONS.
Equipment in this manual is exclusively for painting purposes.
Do not use for other purposes.
The operator shall be fully conversant with the requirements stated in this
instruction manual including important warnings, cautions and operation and
correct handling.
Read and understand the instruction manual, before use and retain for
reference.
INSTRUCTION MANUAL
和文取説は、裏面にあります
