3
Product specification
Introduction
Congratulations on your purchase of an Andrews water heater . The Andrews Water Heaters products are manufactured
in the UK from top quality materials and meets all the latest relevant safety and constructional standards. The high
grade Duplex stainless steel cylinder offers exceptional strength and corrosion resistance which is backed by a Lifetime
guarantee* Its performance and insulation levels exceed the latest requirements of Building Regulation Part L and L2.
The Andrews water heater can be fed directly from the cold water mains supply to the property without the need for
separate feed cisterns or vent pipes. It is supplied complete with all its necessary inlet and safety controls.
The Andrews Water Heaters range all require a separate expansion vessel to accommodate any expanded water.
General Requirements
IMPORTANT: Please read and understand this product guide before installing the Andrews Water Heaters - STXL
cylinder. Incorrect installation may invalidate the guarantee
*
.
The Andrews water heater must be installed, commissioned and maintained by a competent installer in accordance with
building regulation G3 (England and Wales), technical standard P3 (Scotland) or building regulation P5 (Northern Ireland)
and the water fitting regulations (England and Wales) or water byelaws (Scotland).
THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND ABOVE AND PERSONS WITH REDUCED
PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE
BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND
UNDERSTAND THE HAZARDS INVOLVED. CHILDREN SHALL NOT PLAY WITH THE APPLIANCE. CLEANING AND
USER MAINTENANCE SHALL NOT BE MADE BY CHILDREN WITHOUT SUPERVISION
WARNING: Do not switch on if there is a possibility that the water is frozen.
Note: This Andrews water heater needs a minimum 100L/min water supply at open outlet.
