andrews R18 Series, Technical Documentation Manual

Page: 25 / 71

18IP22B
17
4 DELIVERY AND TRANSPORT
4.1 Delivery
4.2 Unit protective
packaging
4.3 Transport
Before delivery, the R18 water heater is fully assembled and
tested in the factory. The R18 is mounted on a pallet and cov-
ered in a "heat-shrink" protective covering.
Check for damage after removing the water heater’s protective
covering.
Check whether the water heater conforms to the order require-
ments.
Check whether the circuit diagram and gas-train diagram num-
ber is in accordance with the offer, order confirmation and the
data on the water heater’s data number plate.
The water heater is mounted on a wooden pallet. For transpor-
tation the water heater is covered in a "heat-shrink" protective
covering. The panel-work is also covered in a protective poly-
ethylene layer. Before final installation in the boiler room the
water heater must be removed from the pallet and all protective
coverings removed.
The protective coverings should be disposed of in a environ-
mentally friendly way. Contact your local authority.
Refer to the technical specifications on weight and dimensions
when transporting the water heater.
WARNING:
- Incorrect moving or lifting of the water heater may cause
damage
- Remove the protective covering after transport and after
installation in the boiler room, when ever possible.