User operation
13
MAXXfl o EVO Lite
3.6 Temporary DHW operation function
Copy Monday to
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Done
Once times have been copied select “Done “ to return to Do-
mestic hot water page.
Outside of the programmed operation times for water heating, the
operation of the water heater can be turned on for a single occasion
where Hot Water will be heated to the nominal set point. The heater
control returns to normal operation using pre-settings as soon as the
hot water reaches set point.
Using enter the Domestic Hot Water page. Move the indicator
over the “Temporary” fi eld and press enter to highlight the fi eld.
Change the “Temporary” fi eld from “---” to “Recharging” and press
enter to activate Temporary operation mode.
Heater operation is now active and will recharge the DHW tank
water to the nominal set point previously programmed.
Once this function has been started it can only be stopped by
changing the operating mode to “on” then back to “off ”.
It is not possible to view or change the nominal set point
once this operation has been started. If you have any
doubts as to the current hot water set point, cancel the op-
eration (as described above) and start the heater using the
operation mode to view and set the nominal set point.
Domestic hot water
Operating mode
Off
Temporary
Recharging
Nominal set point ---
Time program
00 12 24
1
Domestic Hot water
Operating mode
Off
Temporary
---
Nominal set point ---
Time program
00 12 24
