18
DANGER
High Temperature
To prevent scalding:
Remote Controller Display
Hot Water Heater temperatures over 50°C can cause
severe burns instantly or death from scalding.
•
Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available, ask licensed installer.
• When setting the unit to 55°C or higher, "Hi temp" will fl ash for 10 seconds
and emit a tone as a high temperature warning.
• Take caution when using the unit again after setting to 50°C
or higher. Always check the set temperature before use.
* The
indicator is lit.
* The previously set hot water
supply temperature is shown.
[For systems with recirculation operation]
*
If you set the
button to "ON",
recirculation operation is automatically started.
(If "Synchro ON/OFF" was set to "ON".(
p.28))
* The setting temperature displayed
may vary from the actual temperature
at the fixture depending on conditions
such as season or length of piping.
*
During operation, the symbol
may be continuously lit.
1
2
Turn on hot water.
Lit during combustion
Check
(Ex.: 40°C)
Turn off hot water.
Unlit
*
If
is displayed, hot water
will be discharged at the temperature of the
storage tank.
For systems with recirculation operation,
is displayed here.
button is "ON".
Turn off the hot water
Operation
Screen Display
Description
Flashing for 10 sec
Using the Water Heater
[For All Systems]
