7
Assembly
1.
Place the motor section (6) onto a flat stable surface. Make sure the speed
dial (11) is facing towards you.
2.
Fit the spout support (7) into the motor section (6).
3.
Clip the centrifugal bowl (4) into the spout support (7). A click sound will
signal it has been correctly assembled.
4.
Carefully place the funnel (2) onto the top of the spout support (7). Ensure
that the clips of the funnel (2) fit into the spout support (7) slots.
5.
Raise the locking mechanism (10) and firmly lock it into place on the funnel
(9).
Please note:
As a safety feature, the juicer will not switch on unless the lid
is firmly locked into place. Please ensure the two black plastic stoppers on
the locking bar mechanism are pushed as far in towards the centre of the
machine as possible to ensure enough pressure is placed on the lid to allow
the internal sensors to engage.’
6.
Attach the fruit pulp holder (8) under the lip of the funnel (2). Raise it at an
angle then slide the bottom in place.
7.
Place the jugs lid on top of the jug (3) and place it underneath the spout.
8.
Plug the appliance power cord into the electrical socket.
9.
Turn the appliances speed dial (11) to 1.
10.
Place the ingredients into the funnel (2) and press the ingredients down into
the centrifugal bowl using the plunger (1). Increase the speed to 2 if
necessary.
