5
to the power supply outlet or
switch on until the appliance is
assembled.
Unpack the box with care, keep
all the packaging
materials until
you are satisfied everything is
present and in working order.
Do not discard any packaging
until all accessories have been
found.
Inspect the appliance before
use. The appliance, cord and
plug must not have any damage
that could affect operation.
Note: The appliance may emit a
little smoke and/or odour when
it is initially used. This is normal
and does not indicate a fault.
Appliance Assembly
1) The lower tube
has external
threads cut into
both ends.
Connect the
lower tube to the
base by screwing
it clockwise.
2) Align the hole in the table with
the lower tube and push the table
down over the tube.
3) The upper tube is located inside
the middle tube. Unscrew the plastic
clamp and pull the upper tube up
then tighten the plastic clamp.
Connect the middle tube to the
lower tube
4) Feed the power connector and
supply cord through the base and
tubes.
5) Raise the table
past the joint in the
lower and middle
tubes to the
desired height.
6) Secure the Table on the middle
Pole by tightening the plastic collar.
