Andover Controls DCX 250, Installation Manual

Page: 15 / 29

Hardware Installation
DCX 250 Installation Guide 7
Installing the DCX 250
Unpacking
Be careful when unpacking the unit to not damage the packaging
material—you must reuse it if you ship the product back for repair.
Parts Required
To install a single controller you start with the following parts:
• DCX 250 Controller (in its own cabinet)
• AC Power Cable and Infinet Cable
• Infinity CX 9000 Controller
Mounting
Figure 2 gives dimensions for mounting a DCX 250 any of these ways:
• Fitting entire cabinet in wall cutout so it is flush with wall
• Screwing backplate of cabinet to wall
Figure 2. Dimensions of DCX 250 Cabinet, Top View
2.40
3.70
www.PDF-Zoo.com