manualshive.com logo in svg

Andon KD-923, Instruction Manual, Page: 12 / 28

Share
Download
Andon KD-923 Instruction Manual Download Page 12

FIRST TIME POWER UP AND ACTIVATION WHEN USING AN

POD™ (*an optional accessory, sold separately)

READ THROUGH THE

INC. TERMS

AND CONDITIONS FIRST, THEN PROCEED
AND FOLLOW THE PROMPTS ON THE
SCREEN AS SHOWN HERE:

Installation

BP-Manager™

12

LANGUAGE

ENGLISH

ESPANOL

FRANCAIS

OK

the time and date settings may need to be updated if batteries are not in the device for an extended
period of time. Use only new batteries of the required size and the recommended type. For best
performance and the longest life, alkaline batteries are recommended. Do not mix different type, date or
brand name batteries together. Be sure to follow the instructions when installing the batteries. Since
batteries can leak Chemicals that damages electronic parts, leaving the battery in the housing for a long
period without using the device may damage the main unit. Please remove the batteries if you are not
going to use the device for an extended period of time (i.e., 3 months or more). The batteries should be
kept away from small children as they pose a choking hazard. If swallowed, promptly see a doctor for help.

To use the ANDON BP-Manager™ with your ANDON Pod™ you must call an ANDON customer
representative to activate. Make sure to call ANDON before you begin. Then make sure that the
ANDON Pod™ is connected to a telephone line cord and RJ11 jack, (or an Ethernet cord and RJ45
                                                                  jack) and “Powered ON”! Hold down any button on your
                                                                  ANDON BP-Manager™ for 3 seconds to Power up.

First select the appropriate language using the buttons labeled
     and OK.

Then Answer the question on the following screen regarding
terms and conditions using the YES and NO labeled buttons.

To gain full advantage of all the features your ANDON BP-Manager™ has to offer, using an IANDON
Pod™ is recommended. To ensure that your ANDON BP-Manager™ and v Pod™ are setup
properly you will need to call ANDON directly to activate your system. You should ensure that the steps
are followed correctly, you should first setup your ANDON Pod™, power it up, and then begin the steps
of powering up your ANDON BP-Manager™. During your activation call with ANDON, an ANDON
customer representative will verify your ANDON BP-Manager™ and  ANDON Pod™ ID numbers. and
you will be ready to take full advantage of all your ANDON BP-Manager™ has to offer. For a detailed
description of all the features and functions continue to the FUNCTIONS section of this manual.

ANDON

ANDON

ANDON

Summary of Contents for KD-923





























Reviews:

No comments