Installation
! FOR YOUR
Pod™ !
Connecting your
Pod™
USING AN RJ11 JACK
CAUTION!
Note: The
Pod™ is designed not to draw power from the
batteries when the AC adapter is in use.
Installation
BP-Manager™
10
ANDON
ANDON
ANDON
ANDON
• Unplug phone cord from wall before installing, plugging in an external power source, or changing
batteries.
• Never install telephone wiring during a lightning storm.
• Never touch uninsulated telephone wire or terminals, unless the telephone line has been
disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
Plug one end of the telephone line cord (provided) into the jack on the back of your ANDON Pod™
marked LINE.
Plug the other end of the telephone line cord (provided)
into a modular wall jack.
If you wish to use the same modular wall jack for your
ANDON Pod™ and your telephone, connect the telephone
line cord from your telephone into the jack on the back of
your ANDON Pod™ marked PHONE.
Connect the small end of the power supply into the power
AC jack on the back of the ANDON Pod™ marked
POWER. Plug the other end into an AC power outlet.
Your ANDON Pod™ will automatically power up once it is
plugged in to an AC power outlet.