manualshive.com logo in svg

Andon KD-923, Instruction Manual, Page: 11 / 28

Share
Download
Andon KD-923 Instruction Manual Download Page 11

USING AN RJ45 JACK

RECHARGING BATTERIES WITH YOUR

POD™:

Powering UpYour

BP-Manager™

INSTALLING THE BATTERIES (INCLUDED)

Note:

Installation

Instruction Manual

11

Plug one end of the Ethernet cord (not provided) into a modular RJ45
wall jack.

Plug the other end of the Ethernet cord (not provided) into
the RJ45 jack on the back of your ANDON Pod™.

Connect the small end of the power supply into the power
AC jack on the back of the ANDON Pod™ marked
POWER. Plug the other end into an AC power outlet.

Your ANDON Pod™ will automatically power up once it is
plugged in to an AC power outlet.

ANDON

ANDON

•   Remove the battery compartment door on the bottom of your ANDON Pod™ by pushing gently

     in the direction shown on the battery cover.

•   Place the rechargeable batteries as marked.
•   Replace the battery compartment door and push the compartment door shut in the opposite

    direction shown on the battery cover.

•   When using rechargeable batteries with your ANDON BP-Manager™, simply place them in your

    ANDON Pod™ for 10 hours to recharge when battery status is low as indicated on your ANDON   

    BP-Manager™

•    Remove the battery compartment door on your ANDON BP-Manager™ by lifting the battery door

     using the notch

•    Place the batteries as instructed on the device
•    Replace the battery compartment door and click into place

Replacing the battery does not affect previous test results stored in memory of the meter. However,

Summary of Contents for KD-923





























Reviews:

No comments