DN:KD-7961N-SMSY01 V3.0
Operation Guide
Template version:1
8/15
Sitting Comfortably Measurement
a. Be seated with your feet flat on
the floor, and don’t cross your legs.
b. Place palm upside in front of you on a flat surface such as a desk or table,
with your elbow resting on a chair or table
c.
The middle of the cuff should be at the level of the right atrium of the heart
.
8. TAKING YOUR BLOOD PRESSURE READING
a. Ensure the touch button switch in ON position.
b.
After applying the cuff and your body is in a comfortable position, press the ―START‖ button, all display
characters are shown for self-test.
See picture 8.
Please contact the service center if segment is missing.
Picture 8 Picture 8-1 Picture 8-2 Picture 8-3
c. The LCD will momentarily display the last measurement stored in the memory.
See picture 8-1.
If the
monitor has no measurement stored in the memory, the LCD will
display ―0‖ for blood pressure and pulse
rate.
See picture 8-2.
d. If the voice function is switched on, the monitor will speak out measurement tips.
e. Then the monitor inflates the cuff until sufficient pressure has built up for a measurement. Then the
monitor slowly releases air from the cuff and carries out the measurement. Finally the blood pressure
and pulse rate will be calculated and displayed on the LCD.
See picture 8-3.
The irregular heartbeat
symbol (if any) and blood pressure classification indicator will blink on the screen. The result will be
automatically stored in the memory. If the voice function is on, it will announce the measurement result.
f.
After measurement, the monitor will turn off automatically after 1 minute of no operation. Alternatively,
you can press the ―START‖ button to turn off the monitor manually.
g.
During measurement, you can press the ―START‖ button to turn off the monitor manually.
Note: Please consult a health care professional for interpretation of pressure measurements.
9. DISPLAYING STORED RESULTS
a. Ensure the touch button switch in ON position.
b.
Press ―MEM‖ button in Clock Mode. The amount of results will be displayed.
See picture 9.
c. Then the last result will be displayed with date and time.
See picture 9-1.
The irregular heartbeat symbol
(if any) and blood pressure classification indicator will blink at the same time. If the monitor has no result
stored in the memory, the LCD will display ―0‖ for blood pressure and pulse rate.
See picture 9-2.
