DN:KD-7961N-SMSY01 V3.0
Operation Guide
Template version:1
11/15
MAINTENANCE
1.
Do not drop this monitor or subject it to strong impact.
2.
Avoid high temperature and solarization. Do not immerse the monitor in water as this will result in
damage to the monitor.
3.
If this monitor is stored near freezing, allow it to acclimate to room temperature before use.
4.
Do not attempt to disassemble this monitor.
5.
If you do not use the monitor for a long time, please remove the batteries.
6.
It is recommended the performance should be checked every 2 years or after repair. Please contact the
service center.
7.
Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after moistened with water, diluted
disinfectant alcohol, or diluted detergent.
8.
No component can be maintained by user in the monitor. The circuit diagrams, component part lists,
descriptio
ns, calibration instructions, or other information which will assist the user’s appropriately
qualified technical personnel to repair those parts of equipment which are designated repairably can be
supplied.
9.
The monitor can maintain the safety and performance characteristics for a minimum of 10,000
measurements or three years, and the cuff integrity is maintained after 1,000 open
–close cycles of the
closure.
10. It is recommended the cuff should be disinfected 2 times every week if needed (For example, in hospital
or in clinique). Wipe the inner side (the side contacts skin) of the cuff by a soft cloth squeezed after
moistened with Ethyl alcohol (75-90%), then dry the cuff by airing.
EXPLANATION OF SYMBOLS ON UNIT
Symbol for‖ THE OPERATION GUIDE MUST BE READ‖(The sign background colour: blue.The sign
graphical symbol: white)
Symbol for ―WARNING‖
Symbol for ―TYPE BF APPLIED PARTS‖ (The cuff is type BF applied part)
Symbol for ―ENVIRONMENT PROTECTION – Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with your local Authority or retailer for recycling
advice‖.
Symbol for ―MANUFACTURER‖
Symbol for ―COMPILES WITH MDD93/42/EEC REQUIREMENTS‖
Sy
mbol for ―DATE OF MANUFACTURE‖
