12
USER MAINTENANCE
If trimmer is not going to be used for a long period of time,
store in a safe, cool, dry place. Do not wrap adapter cord tightly
around stand. Do not hang the stand by the adapter cord.
The internal mechanism of your trimmer has been
permanently lubricated at the factory. Other than the
recommended maintenance described in this manual, no
other maintenance should be performed, except by Andis
Company or an Andis authorized service station.
To contact
Andis directly, please call our Customer Support Team at
1-800-558-9441 or email us at [email protected].
CARE AND SERVICING OF YOUR ANDIS
TRIMMER BLADES
The blades should be oiled before, during, and after each use. If
your trimmer blades leave streaks or slow down, it’s a sure sign
that the blades need oil. The trimmer should be held in the
position shown in Figure D to prevent oil from getting into the
motor. Place a few drops of Andis Clipper Oil on the front and
side of the cutter blades (Figure E). Wipe excess oil off the
blades with a soft dry cloth. Spray lubricants contain insufficient
oil for good lubrication, but are an excellent trimmer coolant.
Discontinue use of broken or nicked blades to prevent injury.
You can clean the excess hair from your blades by using a small
brush or an old toothbrush. To clean the blades we suggest
immersing the blades only into a shallow pan of Andis Blade
Care Plus while the trimmer is running. Any excess hair and dirt
that has accumulated between the blades should come out.
After cleaning, turn your trimmer off, dry the blades with a soft,
dry cloth and start trimming again.
