Operating manual
– V1.0
CENTORMETER EASY
- 7 -
5.
Display mode
NOTE: Described here are manufacturer settings, prepared by ANDILOG TECHNOLOGIES for
delivery.
When turned on, CENTORMETER force gauge displays a small square in the middle of main
screen (line 1). This small square slides from left to right and then the value of the force applied
to the force gauge sensor appears on line 1 in big letters. If no force is applied, CENTORMETER
force gauge displays « 0 ».
Sensor Capacity:
the range of the sensor detected can be displayed at any time, even for
additional external sensor.
Measure unit:
indicates the unit used for the display. Several units are available. Press the
“UNIT” button to change the measure unit.
Line 1:
displays the current reading.
Time Bar graph:
a black line is the representation of the time.
Line 2:
displays the maximum, minimum, current values and calculations. Could be selected by
pressing “MAX” button.
Status line:
Low battery indication: pictogram indicating the battery power status via 4
horizontal lines which respectively symbolize 25%, 50%, 75% and 100% of power. When adaptor
is connected, this pictogram flashes.
3 N m
+0000
M X I + 0 0 . 0 0
V L I
Measure Unit
Sensor Capacity
Line 1
Time Bar graph
Line 2
Status line