ANDILOG CENTORMETER EASY, Operating Manual, Page: 10 / 16

Operating manual
– V1.0
CENTORMETER EASY
- 9 -
Place your torque tools to control in the square fixture of the Centormter Easy. Press the ZERO
button to reset to 0 the maximum and minimum values. Apply torque on your torque tools.
The Centometer Easy automatically display the maximum values measured on the first line and
will remember it until the ZERO buttons is pressed or the power is turned off.
To make the next test, press ZERO
You can also send the maximum value to a PC pressing the TDX button or from the optional RSIC
Lab software.