Operating manual
– V1.0
CENTORMETER EASY
- 12 -
3.
System setting
This screen displays the general information of your CENTORMETER.
Exit the screen by pressing “M” button to save the settings.
4.
Using the RS232 Output
By default, on the Centometer Easy the RS232 output is switched ON. The RS232 cable connects
to the 15pins connector on the back of the unit. Once connected to a computer, the
Centormeter EASY can send data according to two protocols:
Pressing the TDX button, the Centormeter EASY send under ASCII format the maximum
torque value
The computer queries the Centormeter EASY to retrieve the value
List of the available commands
Menu
Choice
Description
Demand
F
Send the raw data
P
Send the maximum
V
Send the minimum
RS232 configuration
Menu
Choice
Bauds
9600
Parity
SANS
Bits stop
NON
Bits
8
Stop
1
S Y S T E M
C E N T O R M
F : 3 . 1 7 / H 3 0
0 1 / 0 1 / 1 9 9 9
0 3 : 2 4
> E N G L I S H <
S P I P A V 1 0
N 9 9 0 0 0 1
1 6 / 1 1 / 1 9 9 9
M E N U T D X