Operating Manual – V3.39
CENTOR EASY Force Gauge
- 16 -
VI.
Associated products
1.
Manual or motorised test stands
To ensure a precise measurement, it is important that your CENTOR force gauge is placed in the axis
of the force throughout the test. To ensure this placement is correct, ANDILOG and ANDILOG
TECHNOLOGIES have developed a complete range of simple and sophisticated test stands.
These are manual or motorised test stands, some of them being computer-controlled.
If you want more information about test stands, contact your ANDILOG TECHNOLOGIES dealer or
visit our web site www.andilog.com.
2.
Gripping accessories
ANDILOG TECHNOLOGIES offers a series of gripping accessories adapted to different tests: hooks,
plates, pliers, self-squeezing jaws, eccentric jaws, peeling fixture, etc…
If you want to receive our catalogue, contact your ANDILOG TECHNOLOGIES dealer.
3.
Acquisition software
ANDILOG TECHNOLOGIES has developed several programs to save and analyse values.
You want to analyse values on a chart: RSIC software has been developed to this.
You want to capture the values graph and use graphics tools: CALIGRAF software goes further in tests
analysis.
4.
Interface Cables
Several interface cables can be used with CENTOR Easy force gauge:
External pedal: allows simulation of a keyboard button
Cable for analogue link (with male-female plugs): links your gauge to another system
Cable for Digimatic link: connect your gauge to a statistical printer
Cable for RS232 link: connect your gauge to a computer using the RS232 output