14
1.5
2, 2.5, 3
F
0.207
1.5, 2
2.5, 3
G
0.265
1.5, 2
3
H
0.331
2, 2.5, 3
3, 4
J
0.424
2.5, 3
4
K
0.507
3, 4
4, 6
L
0.631
4
6
M
0.709
4
6
N
0.779
4
6
P
0.945
6
8
Q
1.243
6
8, 10
r
2.000
8
10
T
2.550
Anderson Greenwood
SerieS 5200 POSrV
InstallatIon and MaIntenance InstructIons
7.5 performance requirements
7.5.1 Set pressure
Adjust the valve set pressure to the nameplate, within tolerances listed
below.
7.5.1.1 ASME BPVC Section- I Applications:
set pressure, psig [barg]
Tolerance
≤ 70 [4.83]
± 2 psig [0.14 barg]
> 70 [4.83] and ≤ 300 [20.68]
± 3% of set pressure
> 300 [20.68] and ≤ 1000 [68.95]
± 10 psig [0.69 barg]
> 1000 [68.95]
± 1% of set pressure
7.5.1.2 ASME BPVC Section- VIII Applications:
set pressure, psig [barg]
Tolerance
≤ 70 [4.83]
± 2 psig [0.14 barg]
> 70 [4.83]
± 3% of set pressure
7.5.2 Blowdown
set pressure, psig [barg]
Maximum blowdown
< 67 [4.62]
4 psig [0.28 barg]
≥ 67 [4.62] and < 250 [17.24]
94% of the actual set pressure
≥ 250 [17.24] and < 375 [25.85]
15 psig [1.03 barg]
≥ 375 [25.85]
96% of the actual set pressure
7.5.3 Minimum required lift
Inlet size (nps)
outlet size
(nps)
orifice
designator
Min. lift (inches)
note:
For ASME BPVC Section I applications, minimum blowdown for all
safety or safety relief valves shall be 2 psig [0.14 barg] or 2% of the set
pressure, whichever is greater.
