ANDELI
安德利
TIG-250GPLC
7
磁场影响心脏起搏器
Magnetic field influences cardiac pacemaker
咨询医生前，起搏器使用者应远离焊接现场。
Pacemaker user should stay away from welding scene before consulting a doctor.
运动部件可能导致人身伤害
Moving parts might lead to personal injury
应避开运动部件（如风机）。
It is necessary to keep away from moving parts (such as draught fan).
各种门，面板，罩和挡板等防护装置应紧闭和入位。
Various doors, panels, covers, baffles and protective devices shall be closed and in
position.
故障
--------------
遇到困难时，寻求专业人帮助
Fault -------------- seek professional help in case of encountering difficulty
如你在安装操作时遇到困难，请按本手册的有关内容进行排查。
If you encounter difficulty when installing and operating, please troubleshoot in
accordance with relevant contents of the manual.
如你阅读后仍不能完全理解或按本手册指南仍不能解决问题，你应立即与你的供应商或安
德利公司的服务中心取得联系，寻求作业人士帮助。
If you still can’t fully understand after reading the User Manual or still can’t solve the
problem in accordance with the User Manual, you should contact with your supplier or service
center of ANDELI Company immediately to seek professional help.
2:
产品概述
2. Product overview
先进的单管
IGBT
逆变技术。
Advanced single tube IGBT inverter technology.
逆变频率高，显著减少了焊机的体积和重量。
High inverting frequency obviously reduces volume and weight of welding machine.
显著减少铜损耗，明显提高了焊机的整机效率，节能效果显著。
Obviously reduce copper loss, significantly improve overall efficiency of welding
machine, and energy-saving effect is obvious.
开关频率在声频之外，几乎消除了噪音污染。
Switching frequency is beyond audio frequency and almost eliminates noise
pollution.
领先的控制方式
Leading control mode
先进的
ARM
高速处理器控制方案，显著提高了焊机的性能，等大的满足焊接工艺要
求。
Advanced ARM high-speed processor control scheme obviously improves
performance of welding machine and greatly meets requirements of welding process.
具有起弧快，电流稳定，焊点成型好等特点。
Have characteristics of rapid arcing, stable current and good welding spot joint.
连续低温脉冲焊技术，可解决薄板连续拉焊难度。
