ANDELI
安德利
TIG-250GPLC
12
本机设有三种焊接模式，各种模式下参数显示含义及控制方法如下图。
This machine is equipped with three welding modes, parameter display
meaning and control method in each mode are as shown in figure below.
气体延时时间显示
Gas delay time display
延时时间调节
Delay time adjustment
焊接电流显示
Welding current display
焊接电流调节
Welding current adjustment
氩弧焊模式
Argon arc welding mode
点焊时间显示
Spot welding time display
点焊时间调节
Spot welding time adjustment
点焊频率显示
Spot welding frequency display
点焊频率调节
Spot welding frequency adjustment
连续脉冲点焊模式
Continuous pulse spot welding mode
注：此模式下的焊接电流与氩弧焊模式的焊接
电流共享，如需调节请转换到氩弧焊模式下调
节好后再转换回此模式即可。
Notes: welding current and argon arc welding
mode shares welding current in this mode,
please convert to argon arc mode in case of
adjustment, adjust and then switch back to
this mode.
点焊时间显示
Spot welding time display
点焊时间调节
Spot welding time adjustment
焊接电流显示
Welding current display
