User's manual
Guangzhou Andea Electronics Technology Co., Ltd.
10/18
http://www.gzandea.com
5.1.1.
Configuration Parameter Description
5.1.1.1.
System working mode
User's manual
Guangzhou Andea Electronics Technology Co., Ltd.
15/18
http://www.gzandea.com
counting the tag.
5.1.6.
Unidentified tag setting
Manufacturer's ID: Set the vendor code used when the tag type cannot be
identified: 1, Tag-it; 2, NXP.
Tag's ID: Set the tag code used when the tag type cannot be identified.
Note: The above configuration is a common configuration. For other
configuration information, consult our technical staff for configuration.
5.2.
Equipment testing
5.2.1.
Tag inventory testing
After entering the main interface of R-Tool test software, select "ISO Multi-Tag
Test" and carry out the procedure as shown in the following figure
①
,
②
and
③
for
tag inventory test:
