User's manual
Guangzhou Andea Electronics Technology Co., Ltd.
8/18
http://www.gzandea.com
Select the appropriate communication method according to the actual interface
type of the device: Since the communication interface of the device is a USB interface,
select "USB Communication" in [Communication Interface] under [Search
Parameters].
After the communication interface is set up, click the [Search] button to find the
device. After the device is found, the device information will be automatically
displayed in the "Discovered Devices" list as follows:
User's manual
Guangzhou Andea Electronics Technology Co., Ltd.
17/18
http://www.gzandea.com
Note
:
Step 1: In the software main interface, select the menu "Single Tag Test";
Step 2: in the "Single Tag Test" interface, select the type of tag to be operated;
Step 3: mode: none address, address.
1, For a single tag, select the "none address" mode.
2, For multiple tags, select the "address" mode.
Step 4: Click the "Inventory" button to display the uid list in UID drop-down
box.
Step 5: 1, For a single tag: click the "Connect" button;
2, For multiple tags: in UID drop-down box, select the tags required to
be operated, and then click the "Connect" button;
After the above steps, you can read and write tags, as shown below:
