9
8
Set and test the product before using it.
2
Setting the menu
"Test" Button ( ): Press to move to the next menu item.
I/O TEST -> EEPROM TEST -> .. -> SOUND TEST -> EXIT
"Service" Button ( ): Press to select the menu item you prefer.
1
Entering the Test mode
Press the "Test" button ( ) on the board and the hardware testing and game setting menu will
appear on the screen.
The program version information is displayed on the top and to the left of title screen
and the bottom and to the left of initial screen.
▶
Checking the version information
Testing and Setting the PUMP
I / O Test
The I/O Test lets you test the pad sensors and the lamps, buttons located on the body of product.
Selecting the I/O Test
1
Press the "Test" button ( ) on the board to move the cursor to I/O TEST
in the Game Setting mode.
2
Press the "Service" button ( ) and the I/O Test items will appear on the screen.
3
■
Pad Test
: Each pad includes four sensors. Check the sensors properly operate.
If every sensor is okay when you stand on a pad or pads, the pads shown
on the screen yellow light.
■
Lamp Test : Check whether the halogen lamps (yellow, red) on the top of body
and the neon lamp (blue) located on the bottom of body (speaker) flicker
in regular sequence.
■
Button Test : Check whether the Test, Service, Clear button and coin controller operate
normally. (If all lamps operate normally, their colors will be changed into red
and flicker.)
※
If nothing normal happens, contact your service center for inspection or repair.
Press the "Service" button ( ) again to exit from I/O TEST.
I/O TEST
EEPROM TEST
SCREEN TEST
GAME OPTION
COIN OPTION
SOUND TEST
BOOKKEEPING
STATISTICS
EXIT
SETUP MENU
Lock OK:0 Err:0
I/O TEST
1. TEST BUTTON : OFF
2. SERVICE BUTTON : OFF
3. CLEAR BUTTON : OFF
4. COIN1 : OFF
5. COIN2 : OFF
EXIT - SERVICE BUTTON
