7
Precautions for use
6
Inspection and cleaning
Moving and transportation
CAUTION
WARNING
The game machine contains parts such as
the monitor, electronic components and
precision components which are sensitive to
vibrations and impacts. Great care therefore
should be taken when moving and
transporting the game machine.
Be sure not to let the machine tip over.
Before moving the machine, be sure to turn
OFF the main power switch, unplug the
power cord form the receptacle and remove
the power cord form the machine.
• Stepping on or tripping over the power cord
may result in an accident or damage to the machine.
Before moving the machine, be sure to fully lift the
four levelers and move it on the casters.
• Otherwise, an accident, breakage or trouble may result.
Do not apply a strong force for moving the machine.
• Otherwise, it may result in an accident or breakage of
the units.
P R E C A U T I O N S
IN HANDLING
• When setting up, inspecting, maintaining, moving or
transporting this product, follow the procedures and
instructions set forth in this manual and perform such
work safely.
• Do not set up, handle, inspect, maintain, move or
transport this product under conditions equivalent to the
condition of "WARNING" or "CAUTION" specified in this
manual.
• If a new owner is to have this product as a result of
transfer, etc., be sure to give this manual to the new
owner.
Be sure to turn OFF the main power switch
and unplug the power cord from the
receptacle before inspecting or cleaning the
machine.
• Failure to do so could result in electrical shock.
When replacing parts, be sure to use parts of
the correct specifications. Never use parts
other than the specified ones.
• Using improper parts could result in fire or
equipment failure.
There is high voltage inside the machine.
Only qualified industry specialist is allowed
to open the machine's back door. With the back door
open, be very careful not to touch the monitor and its
nearby parts.
• Otherwise an accident or electric shock may result.
If the sub power switch of the service panel is turned
OFF without turning OFF the main power
switch of the power supply unit, some parts
in the units remain live. When opening the
back door, be sure to turn OFF the main
power switch and unplug the power cord
from the receptacle.
• Otherwise, there may be danger an accident or electric
shock.
Strictly refrain from disassembly and repair of parts
which are not indicated in this manual, as
well as settings and remodeling.
• Otherwise, a fire, malfunction or trouble may
result. In case of any trouble, ask your nearest dealer
for repairs and other services. ANDAMIRO will not
resume any responsibility for the damage to the product
attributable to disassembly and repair of parts which
are not indicated in this manual, as well as settings and
remodeling.
To clean the game machine, wipe it with a soft cloth
dampened in a neutral detergent.
• Using thinner of other organic solvent or alcohol may
decompose the material.
• Electrical shock or equipment failure could be caused
by water entering the inside of the machine.
Safety Instructions
These safety instructions are for user safety and to prevent the users properties from being damaged. Read the
following safety instructions carefully before using the pump it up.
ANDAMIRO takes no responsibility for any damages and troubles caused by the users mistakes.
1
Power Supply
2
I n s t a l l i n g
3
Cleaning & Others
■
Use only a grounded outlet.
■
Do not extend the power cord for use.
■
Check the power requirements for the place to install the product.
■
Use the power cord matching with power requirements.
■
Use the rating fuse.
■
Do not touch the power plug with wet hands.
■
Power off the product when installing the product.
■
Do not place the product near heating or inflammable materials.
■
Install the product on the place that fully stands vibration.
■
Install the product in the place of having good ventilation.
■
Fasten the product so that it does not move.
■
When installing or moving the product, refer it to a qualified service personnel.
■
Do not randomly disassemble the product or give it a shock.
■
Be careful that water can not flow in the product.
■
Do not use any volatile detergent such as wax or thinner.
■
Clean inside the product periodically to remove dirt or contamination.
■
Do not use the product for other purposes.
