28
7.
Preparing the Recorder
7.1.
Installing Batteries (Replacing Batteries)
Install two new batteries in accordance with the correct "
+
" and
"
-
" direction inside the battery compartment before attaching
the recorder.
Replace both batteries at the same time.
Remove batteries from the recorder if it is not used for a long
period of time. Batteries may leak and cause a malfunction.
Use two alkaline batteries : type LR6 or designated
rechargeable AA Ni
-
MH batteries.
When installing the battery in the battery compartment, first,
push the spring terminal using the "
-
" terminal of the battery.
Next, insert the "
+
" terminal.
If the battery is installed from the "
+
" terminal, the coating of the
battery may be damaged by the spring terminal.
Do not mix and use different kinds of batteries or used batteries
and new batteries. It may cause a leak, heating or damage.
Note
When the level 1
of the battery level is displayed, replace
with two new batteries before attaching the recorder.
The recorder cannot perform blood pressure measurement or data
transfer while the level 1
is displayed.
When the battery and built-in battery are dead, nothing is displayed.
Install batteries in accordance with the direction symbol (
).
Summary of Contents for TM-2440
Page 18: ......
Page 32: ...14 4 2 Dimensions 95 Unit mm 24 5 ...
Page 94: ...76 MEMO ...
Page 95: ......
