background image

 

1

Warning Definitions 

The warnings described in this manual have the following meanings: 

 

Caution 

A potentially hazardous situation which, if not avoided, may result in minor or moderate injury. 
It may also be used to alert against unsafe practice. 

 

Note 

An important description for proper use of the instrument. 

 

 

Precautions 

 Caution

 

 

Do not heat the battery, disassemble or dispose of in fire. It may build up heat, explode, or leak and 
cause a fire. Follow the local regulations when disposing of a used battery. 

 

Do not allow the battery to become wet. It may build up heat or cause a fire. 

 

Recharge the battery only after the battery has been discharged completely. Charging the battery 
repeatedly, with incomplete discharging, may result in heat buildup, generating gases or leaking. 

 

When charging the battery, use the charger provided with the battery. Using a charger other than 
the one provided may cause heat buildup and could cause a fire. 

 

The AD-1682 is designed to be used with balances manufactured by A&D. Using the AD-1682 with 
products other than specified may cause heat buildup and could cause a fire. Before use, see “1-4 
List of Applicable Balances” to check which balances can be powered by the AD-1682. 

 

Keep the battery out of the reach of children. 

 

Do not drop or apply shock to the battery. 

 

 

Compliance 

Compliance with FCC Rules 

Please note that this equipment generates, uses and can radiate radio frequency energy. This 
equipment has been tested and has been found to comply with the limits of Class A computing device 
pursuant to Subpart J of Part 15 of FCC rules. These rules are designed to provide reasonable 
protection against interference when the equipment is operated in a commercial environment. If this unit 
is operated in a residential area it may cause some interference and under these circumstances the 
user would be required to take, at his own expense, whatever measures are necessary to eliminate the 
interference. 

(FCC = Federal Communications Commission in the U.S.A.) 

 

Compliance with EMC Directives   

This device features radio interference suppression in compliance with valid EC 
Regulation 89/336/EEC. 

Summary of Contents for Rechargeable Battery AD-1682











Reviews: