• This range hood is factory set for venting through the roof or wall.
• Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed.
IMPORTANT:
• NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling,
attics or garages. All exhaust must be ducted to the outside.
• Use metal/aluminum duct work only.
• Fasten all connections with sheet metal screws and tape all joints with certified Silver Tape or Duct Tape.
• Use caulking to seal exterior wall or roof opening around the cap.
OPTION 1:
OPTION 2:
SIDE WALL CAP
VERTICAL ROOF VENTING
ROOF CAP
HORIZONTAL WALL VENTING
Summary of Contents for II 30
Page 4: ......
Page 11: ......
Page 18: ...18...
Page 20: ...bracket bracket UPPER AND LOWER CHIMNEY BRACKETS...
