background image

LIMITED PRODUCT WARRANTY 

Subject to the limitations, exclusions and disclaimers hereof, AMS warrants exclusively to the original purchaser (the “

Purchaser

”) of this 

Ancona  Range  hood  product  (the  “

Product

”)  that  it  shall  be  free  from  defects  in  material  or  workmanship  (the  “

Limited  Product 

Warranty

”). The duration of the Limited Product Warranty is 12 months from the date of original purchase (the “

Warranty Period

”). 

The  Limited  Product  Warranty  does  not  extend  to  commercial  or  institutional  use  or  installation  and  to  residential  or  domestic  use  or 

installation outside of Canada and the USA. It is not transferable or assignable to any person. 
Any failure of the Product that is not traceable to a defect in material or workmanship is not covered by the Limited Product Warranty. These 

non-warrantable items include, but are not limited to: (i) consumable and accessory parts; such as light bulbs or filters; (ii) service outside of 

Canada  and  the  USA;  (iii)  damage  caused  during  shipping,  handling  or  installation;  (iv)  labour  costs  related  to  installation,  removal, 

reinstallation costs or other contingent expense; or (v) routine replacement of parts due to normal wear and tear of the Product. 
If the Purchaser discovers within the Warranty Period a defect in material  or workmanship, the Purchaser shall promptly notify  AMS in 

accordance with the Warranty Claim Procedure set forth below. Within a reasonable time after such notification, AMS shall, at no charge to 

the Purchaser: (i) perform any repair or replacement  of parts that it determines is necessary or useful to correct any defect in material or 

workmanship; or (ii) replace the original Product with a new Product, the whole at AMS’ sole and absolute discretion. The remedy provided 

above shall be the Purchaser’s sole and exclusive remedy and AMS' sole and exclusive obligation under the Limited Product Warranty. 
Products or parts that are new or reconditioned to perform as new, shall be exchanged by AMS upon receipt of the original Product or parts 

from the Purchaser and, upon the completion of such exchange, the original Product or parts shall become AMS’ property. The Warranty 

Period shall not be extended due to suspension of the use of the Product because of repair, replacement, examination or for any other reason. 
Subject  to  the  Purchaser’s  compliance  with  the  Warranty  Claim  Procedure  set  forth  below,  transportation  and  installation  of  warranty 

replacements shall be performed at AMS’ cost, and AMS shall bear the risk of loss or damage to returned Product or parts while in transit. 
AMS’  Limited  Product  Warranty  shall  be  automatically  void  if:  (i)  any  repair,  alteration,  modification,  customization,  disassembling, 

addition or any other work is performed on the Product by any person  not authorized by  AMS to do so; (ii) any alleged material defect, 

including  deterioration  or  wear,  is  a  result  of  failure  to  observe  the  manufacturer’s  instructions  or  guidelines,  abuse,  misuse,  improper 

operation, care or maintenance, unusual physical or electrical stress and/or power surges, brown-out, chemical abrasion or improper chemical 

or environmental conditions, leaking, fire, lightning, 

force majeure

 or superior force, accident, error, negligence, or is a result of use for non-

domestic or non-residential purposes or for any purpose other than the Product’s intended purpose; (iii) the Product is operated in conjunction 

with accessories, other products, ancillaries  or peripheral equipments  or substances that have not been  previously  approved in writing or 

validated by AMS; or (iv) Purchaser fails to comply with the Warranty Claim Procedure set forth below. 
THE  LIMITED  PRODUCT  WARRANTY  IS  EXCLUSIVE  AND  IN  LIEU  OF  ALL  OTHER  WARRANTIES  OR  CONDITIONS 

INCLUDING,  BUT  NOT  LIMITED  TO,  IMPLIED  WARRANTIES  OR  CONDITIONS  OF  MERCHANTABILITY,  FITNESS  FOR  A 

PARTICULAR  PURPOSE  AND  NON-INFRINGEMENT  OF  THIRD  PARTY  RIGHTS  OF  ANY  KIND,  MADE  OR  INTENDED  BY 

AMS OR ITS AUTHORIZED DISTRIBUTORS. 
IN NO EVENT SHALL AMS BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE PAID BY THE PURCHASER 

FOR  THE  PRODUCT,  OR  FOR  ANY  INDIRECT,  INCIDENTAL,  SPECIAL,  CONSEQUENTIAL,  PUNITIVE,  EXEMPLARY  OR 

OTHER SIMILAR DAMAGES, WHETHER FORESEEABLE OR UNFORESEEABLE, ARISING OUT OF OR IN CONNECTION WITH 

THE USE OF THE PRODUCT, INCLUDING THE ABILITY OR THE INABILITY TO USE THE PRODUCT. 
The terms hereof and any action in connection therewith, regardless of form, shall be interpreted and construed in accordance with the laws 

of the Province of Québec and the laws of Canada applicable therein, without giving effect to principles of conflicts of laws. If a provision of 

this Limited Product Warranty is determined to be invalid, illegal or unenforceable, all other provisions will remain in full force and effect.

 

WARRANTY CLAIM PROCEDURE 

In the event a claimable defect occurs, the Purchaser shall call AMS’ customer service department at 1-800-350-4562 in order to obtain a 

return authorization number and shipping instructions (the “

Authorized Shipping Instructions

”). 

The  Purchaser  shall  then  promptly  ship  the  Product,  in  accordance  with  the  Authorized  Shipping  Instructions  with  the  following 

documentation/information: 

 

the name and address of the Purchaser; 

 

the Product model number; 

 

the date and location of the purchase of the Product; 

 

the original sales receipt of the Product; 

 

the complete description of the problem; 

 

the name and address of the installer of the Product. 

Claims must be filled out in writing and received by AMS within six months of the appearance of the claimable defect. 

For service and assistance, please call: 1-800-350-4562, or email us at: [email protected] 

Summary of Contents for II 30


























Reviews: