manualshive.com logo in svg

Anchor Perfectshade, Assembly Instructions Manual

Share
Download
Anchor Perfectshade Assembly Instructions Manual Download Page 2

Warning:  The Perfect Shade Structure is intended for concrete Install only.  Installer is solely  re-
sponsible for evaluating the quality of the concrete and its suitability for this structure.
Concrete installation surface must be level.

Manpower Required:

Three experienced installers should be able to assemble any size frame with fabric in two hours. 

Caution:

Please read through this assembly manual completely before beginning your installation.  Be sure the proper 
equipment and safety precautions are in place.  We hope that you enjoy the design features of the Perfect Shade 
Structure.

1.  Be aware to avoid contact of frame sections with any overhead power lines near the site.

2.  Consult the local utility company prior to installation in order to avoid all underground power lines and gas 
lines or other utility easements.

3.  Keep site clear of debris to avoid tripping, especially while carrying frame parts or bundle of fabric.

4.  When moving frame sections by hand, use proper lifting techniques to protect the back, and avoid pinching 

fi

 ngers while making hardware connections.

5.  Do not drag bundle of fabric on concrete, asphalt, or ground as this can cause damage to the fabric from abra-
sion through the bag.

6.  The installation method described here requires coordination of tasks between workers.  A safe installation is 
dependent on that coordination.  Work cooperatively as a team.

7.  This tent is manufactured for use as a temporary sun shade structure.  Evacuation is recommended if threaten-
ing or windy weather occurs.

Parts List

Part Name

Qty. for (1) 

Frame

Upright with Base Plate

4

Hip Weldment

4

Peak Weldment

2

Ridge Tube

1

Hex Head Cap Screw 1/2 x 3 1/4”

4

1/2” Nylock Nut 

4

Fabric top in bag with wire rope & clamps

1

Installation Kit (purchased separately)

1

Hip Weldment

Ridge Tube

Fabric top Bag

with wire rope & clamps 

attached to top.

Upright with

Baseplate

Peak Weldment

1/2” Nylock 

Nut

1/2” Hex 

Head Cap 

Screw

Installation Kit

Come-a-long (2)

Pull Rope (2)

Eyebolt (2)

Neoprene

Washer (4)

Wing nut 

(2)

(4) Wire Rope 

Clamps

(spares)

2

Summary of Contents for Perfectshade










Reviews:

No comments

Brands by name

Popular brands

Load more brands