MADE IN USA
SIX YEAR WARRANTY
Cinemark Acclaim Lectern Sound System Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com/cinemark/
European Union CE Mark European Union CE Mark
Waste Electrical and Electronic Equipment (WEEE)
Inspection for Damage
Direct current symbol
Fuse Symbol
On Symbol
Off Symbol
The presence of the CE Mark on Anchor equipment means that it has
been designed, tested and certified as complying with all applicable
European Union (CE) regulations and recommendations.
This symbol on the product or on its packaging indicates that this
product must not be disposed of with regular waste. Instead, it is the
user responsibility to dispose of waste equipment according to the local
laws. The separate collection and recycling of the waste equipment
at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and
the environment. For information about where the user can drop off
the waste equipment for recycling, please contact your local Anchor
representative. See Section for instructions on how to disassemble the
equipment for recycling purposes.
Warning:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture, apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
– minimum distances around the apparatus for sufficient ventilation; the ventilation should
not be impeded by covering the ventilation openings with items, such as newspapers, table-
cloths, curtains, etc.; no naked flame sources, such as lighted candles, should be placed on
the apparatus.
– attention should be drawn to the environmental aspects of battery disposal; the use of
apparatus in tropical and/or moderate climates.
-Equipment may be located above or below this apparatus, but some equipment (like large
amplifiers) may cause an unacceptable amount of hum or may generate too much heat and
degrade the performance of this apparatus.
The Model Acclaim is carefully packaged at the factory to minimize
the possibility of damage during shipping. Inspect the box for external
signs of damage or mishandling. Inspect the contents for damage.
If there is visible damage to the instrument upon receipt, inform the
shipping company and Anchor Inc. immediately.
This international symbol implies a Direct voltage or current.
The fuse symbol in the figure above identifies the fuse location on
the Anchor System. (Not required if not user replaceable)
The On Symbol in the figure above represents a power switch position
on the Anchor System. This symbol represents a Power On condition.
The Off Symbol in the figure above represents a power switch position
on the Anchor System. This symbol represents a Power Off condition.
Figure DC Voltage Symbol
Figure WEEE Directive Symbol
Figure Fuse Symbol
Figure On Symbol
Figure Off Symbol
Inspection for Damage
Do not attempt to operate this equipment if there is
evidence of shipping damage or you suspect the unit is
damaged. Damaged equipment may present additional
hazards to you. Contact Anchor technical support
for advice before attempting to plug in and operate
damaged equipment.
O
