MADE IN USA
SIX YEAR WARRANTY
Beacon® Sound System Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
9
General Warning or Caution
Electric Shock
Protective Conductor Terminal
European Union CE Mark European Union CE Mark
Alternating voltage symbol
Waste Electrical and Electronic Equipment (WEEE)
Electrical Requirements
Inspection for Damage
Fuses
On Symbol
Off Symbol
The Exclamation Symbol in the figure above appears in Warning and Caution
tables throughout this document. This symbol designates an area where
personal injury or damage to the equipment is possible.
The Electrical Shock Symbol in the figure above appears throughout this manual.
This symbol indicates a hazard arising from dangerous voltage. Any mishandling
could result in irreparable damage to the equipment, and personal injury or
death.
The Electrical Shock Symbol in the figure above appears throughout this manual.
This symbol indicates a hazard arising from dangerous voltage. Any mishandling
could result in irreparable damage to the equipment, and personal injury or
death.
The presence of the CE Mark on Anchor equipment means that it has been
designed, tested and certified as complying with all applicable European Union
(CE) regulations and recommendations.
The presence of the CE Mark on Anchor equipment means that it has been
designed, tested and certified as complying with all applicable European Union
(CE) regulations and recommendations.
This symbol on the product or on its packaging indicates that this product
must not be disposed of with regular waste. Instead, it is the user responsibility
to dispose of waste equipment according to the local laws. The separate
collection and recycling of the waste equipment at the time of disposal will help
to conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment. For information about where the
user can drop off the waste equipment for recycling, please contact your local
Anchor representative. See Section for instructions on how to disassemble the
equipment for recycling purposes.
Warning:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture,
apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
The apparatus connected to a main socket outlet with a protective earthing connection. For Nordic
markings refer to copy of marking label.
The plug in the power cord is the AC mains disconnected device and must remain readily operable. –
minimum distances around the apparatus for sufficient ventilation; the ventilation should not be impeded
by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.; no
naked flame sources, such as lighted candles, should be placed on the apparatus.
-Equipment may be located above or below this apparatus, but some equipment (like large amplifiers)
may cause an unacceptable amount of hum or may generate too much heat and degrade the
performance of this apparatus.
Before attempting to power up the unit for the first time, the following
precautions must be followed:
The Model Beacon is carefully packaged at the factory to minimize the possibility
of damage during shipping. Inspect the box for external signs of damage or
mishandling. Inspect the contents for damage. If there is visible damage to
the instrument upon receipt, inform the shipping company and Anchor Inc.
immediately.
Have a qualified electrician verify the wall socket that will be used is properly polarized and properly
grounded.
The fuse symbol in the figure above identifies the fuse location on the Anchor
System. (Not required if not user replaceable)
The On Symbol in the figure above represents a power switch position on the
Anchor System. This symbol represents a Power On condition.
The Off Symbol in the figure above represents a power switch position on the
Anchor System. This symbol represents a Power Off condition.
Electrical Shock Symbol
Figure Protective Conductor
Terminal Symbol
Figure WEEE Directive Symbol
Figure Fuse Symbol
Figure Alternating Voltage
Symbol
Figure On Symbol
Figure Off Symbol
O
WARNING
To avoid electric shock, connect the instrument to properly
earth-grounded, 3-prong receptacles only. Failure to observe
this precaution can result in severe injury.
Inspection for Damage
Do not attempt to operate this equipment if there is evidence
of shipping damage or you suspect the unit is damaged.
Damaged equipment may present additional hazards to you.
Contact Anchor technical support for advice before attempting
to plug in and operate damaged equipment.
