background image

MADE IN USA

SIX YEAR WARRANTY

Beacon® Sound System Owners Manual

For System Setup & Operation Videos Visit Our Website:  www.anchoraudio.com

USING THE BUILT-IN CD/MP3 COMBO PLAYER

Your CD/MP3 combo player supports WMA and MP3 files, as well as CD, CD-R, CD-RW, and MP3 disks.  Input slots for play are CD, USB,  SD card slot, and AUX 
port for other music player devices.
 
Turn on with the POWER button and then insert the memory card, USB or CD.  Push CD/SD/USB button until your device is displayed.  The auxiliary port 
becomes active when the 3.5mm cable is inserted.

EJECT

PROG

1

2

3

4

5

6

7

8

0

9

RAN

REP

FOLDER

CD

USB/SD

*

The Beacon built-in CD/MP3 combo player comes with remote.

The LCD functions as used:

 

POWER:

  

Press once for ON or OFF

 

CD/USB/SD:

 

Press to change the mode of operation

 

REV:

 

Press to select the previous track.  Press and hold to reverse track

 

F.WD:

 

Press to select the next track.  Press and hold to fast forward track

 

PLAY/PAUSE:

 

Press once for PLAY or PAUSE

 

MUTE

:  

Press once for mute ON and again to mute OFF

 

STOP/EJECT:

 

Press once to stop playing music.  Press twice to stop and eject disk

 

FOLDER          :

 

Select next folder (MP3 format only)

 

FOLDER          :

  

Select previous folder (MP3 format only)

 

SHU./ENTER:

 

Press once to play tracks randomly.  “SHUFFLE” will show on the LCD.  When used with the PROGRAM function, it acts as the confirmation key.

 

PROGRAM:

 

Press to set the programming mode.  Press once so the LCD shows “PROGRAM”.  To navigate the different folders, press the FOLDER buttons   

 

 

 

(MP3 format only), and to navigate the songs press the SKIP buttons.  Press SHU./ENTER to select the desired songs.  When finished selecting, press  

 

 

 

PLAY/PAUSE.  The LCD will show “MEMORY” and will begin to play.  To cancel the PROGRAM mode select PROGRAM again.

 

REPEAT:

 

Press until the desired repeat playing function is displayed on the LCD.  REPEAT 1 will repeat the present song REPEAT ALL will repeat all songs.   

 

 

 

REPEAT FOLDER will repeat all the songs in the folder (MP3 format only).  No LCD display means the repeat playing function has been canceled.

REMOTE CONTROL

*Remote follows same functions 
as CD/MP3 combo player

CD

POWER

REPEAT

ENTER

R

SD/USB

SHUF

MUTE

AUX IN

FOLDER

SD

CARD

REW

F.WD

EJECT

STOP

PROG.

SKIP

PLAY

PAUSE

4

Summary of Contents for Beacon BEA-8000












Reviews: