Preliminary - Information Subject to Change - 9/24/98
EZ-USB Development Kit Software
3 - 3
Installing the
Control Panel,
Drivers and
Documentation
Insert the installation CD into your CD ROM drive and run the
program “setup.exe” by going to the start menu and running
Setup.exe on the CD root directory.
You will see a menu of possible install options:
•
Adobe Acrobat Reader 3.0
•
Anchor Chips EZ-USB Control Panel
•
Keil 8051 2K Development Tools
•
Keil 8051 4K Development Tools
IMPORTANT NOTE:
You must run the Setup.exe program once for every item you would
like to install. The typical installation includes the Anchor Chips
EZ-USB Control Panel and the Keil 8051 2K Development Tools.
Adobe Acrobat Reader allows you to view the documentation
which is in PDF file format.
Select the appropriate menu item and follow the install directions
on the screen.
The Anchor Chips EZ-USB Control Panel is a Windows program
that allows sending and receiving of data over the USB to an
Anchor Chips EZ-USB IC. This selection also installs all of the
sample code, examples, drivers and documentation.
After you have clicked “Finish” to complete the Anchor EZ-USB
Control Panel installation, you may run the application by
selecting: “Start\Programs\Anchor\EzMr.”
The Control Panel application may be uninstalled completely by
using the “Add/Remove Programs” component available in the
Windows Control Panel.
The Keil Development Environment allows you to compile C and
assembly code for the 8051, link the object files and debug your
program using the Monitor program included with the kit. The Keil
package includes the uVision C Source code development
environment, and the dScope debugger. The Keil C compiler and
linker are limited versions intended for evaluation and beginning
