XFR Apprentice Workout Station
Assembly Instructions
Step 7
Place the assembled XFR Workout Station against the wall where it will be installed.
Line up the pre-drilled holes in the studs with the pre-drilled holes in the support boards.
Using the 5/8” x 4” Lag Screws and a socket wrench, bolt the station on to the wall.
Step 8
Once mounted, place a level on each support board. If adjustment is necessary,
tap on the top or bottom of the board until level.
Step 9
Tighten the bolts on the metal bars and install vinyl caps over the bolt heads. Don’t over
tighten
NOTE:
These caps are designed to fit tight
