Anaren A1101R09A User Manual Download Page 13

A1101R09x – User’s Manual 

 

Page 13 of 33 

Release Date 05/08/12 

 

 
 

 

 

2.  Approvals and Usage 

The  A1101R09A  and  A1101R09C  have  been  designed  to  meet  most  national  regulations  for 
worldwide  ISM-band  use.  In  particular,  the  radio  modules  have  been  certified  to the  following 
standards. 

2.1. 

Product Approvals 

2.1.1.  USA (Federal Communications Commission, FCC) 

The A1101R09A, with integrated antenna, as well as the A1101R09C, used with the antennas 
listed in Table 2 below, have been tested to comply with FCC Part 15 - 15.247(a2) and 
15.247(b) and 15.249 “Intentional Radiators.” The devices meet the requirements for modular 
transmitter approval as detailed in FCC public notice DA 00-1407 Released: June 26, 2000. The 
A1101R09A and A1101R09C module can be integrated into a finished product without obtaining 
subsequent FCC approvals. 
 
(15.19a3) The modules comply with part 15 of the FCC rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation. 
 

Table 2 Approved Antennas 

Item  Part Number 

Manufacturer 

Type 

Gain 

Integral part of A1101R09A 

Anaren 

Integral Antenna 

66089-0906 

Anaren 

Monopole whip, 6mm lead 

66089-0930 

Anaren 

Monopole whip, 30mm lead 

 

2.1.1.1.  FCC Labeling Requirements 

The A1101R09A and A1101R09C modules have been labeled with their own FCC ID number 
and if the FCC ID is not visible when the module is installed inside another device, then the 
outside of the finished product into which the module is installed must also display a label 
referring to the enclosed module. This exterior label can use wording such as the following: 
 
Contains Transmitter Module FCC ID: X7J-A10040601 

-or- 

Contains FCC ID: X7J-A10040601 

This device complies with Part 15 - 15.247(a2) and 15.247(b) and 15.249 of the FCC Rules.  

Operation is subject to the following two conditions:  

(1)  this  device  may  not  cause  harmful  interference,  and  (2)  this  device  must  accept  any 
interference received, including interference that may cause undesired operation. 

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Summary of Contents for A1101R09A


































Reviews: