Page
11
– Vector Signal Generator – v1.00
March 2021
AnaPico Inc. - www.anapico.com – [email protected]
Rear Panel
Figure
6
: APVSG 2URM Rear Panel View
Ports available per RF channel:
1.
FCP
Fast Control Port, see application note
2.
MF input [1..2]
SMB jack is a multifunction input port
3.
MF output [1..2]
SMB jack is a multifunction output port
Ports belong to the instrument:
4.
CLK IN
Proprietary port for multi-device synchronization: SMB jack
5.
CLK OUT
Proprietary port for multi-device synchronization: SMB jack
6.
REF OUT
This BNC female Connector is the output for the reference signal.
7.
REF IN
This BNC female Connector is the input for the reference signal.
8.
GPIB Connector
In case the device has the option “GPIB”, on this position is the GPIB connector.
9.
LAN
The LAN connector is used to connect the device to a network
10.
USB B
The USB B connector is used to connect the device to a computer.
11.
FUSE Holder
This holder contains an exchangeable fuse.
12.
AC Power
Connector for AC power
13.
ON/OFF Switch
Turns the device on or off.
14.
Ground Screw
The screw can be used to connect the device to ground reference
